Electric extend + retract
Set up and pack down the shade area from the powered control system.

Create a comfortable outdoor living space in seconds with a powered roll-out awning built for straightforward 12V operation, adjustable pitch and compact travel storage.
Motorized roll-out awning that extends and retracts at the touch of a button, giving you shade and weather cover at camp in seconds. The black case carries Carbonogy branding and the arms and fabric are built for off-road touring.
Replace it when wind has bent an arm, the motor has failed, or the fabric has torn or delaminated after years of sun.
Choosing a length: measure your existing awning case end to end and pick the matching size, 11.48 ft or 13.12 ft. Not sure which you have? Contact us with your camper model and build year and we will confirm.
Installation and care: installation is a two-person job. Mount into the structural rail or backing used by the original awning and seal every fastener penetration with marine-grade sealant. Retract the awning whenever the wind picks up or you leave camp, let the fabric dry before rolling it away, and keep the arm pivots clean and lightly lubricated.
Measure the available wall length, mounting height, bracket positions, structural backing and door clearance before ordering. All brackets must be aligned on one plane. Professional installation is recommended.
Shipping times and return eligibility follow current store policies. Keep the product uninstalled until fitment has been confirmed.
Fast powered deployment turns the space beside your RV into a sheltered outdoor room, then stores everything in a clean, travel-ready profile.
Set up and pack down the shade area from the powered control system.
The motor system is designed around the standard 12V electrical supply used in RVs.
Choose the awning length that matches the available wall space and mounting structure.
Arm-base adjustment helps create drainage toward one side during light rain.
Deploy the legs and ground stakes when site conditions allow for added stability.
The roller, fabric and arms retract into a clean housing for travel and storage.
Motor figures are based on the 12V configuration in the supplied manual. Confirm the selected length, projection, control type and included parts before ordering.
Measure the available RV wall length, existing awning, bracket locations and door clearance. Confirm adequate structural backing. Do not select the size only by RV model name.
Yes. The supplied manual shows pitch adjustment at the left and right arm bases. Small adjustments can create a low side for rainwater drainage.
For light rain, create a clear low side so water runs off and never pools on the fabric. Retract the awning during strong wind, severe weather, before travel or whenever the RV is unattended.
Professional installation is recommended. The mounting brackets must attach to adequate structure, align on one plane, seal against water intrusion and connect to the correct 12V supply.
This page automatically reads images uploaded to this Shopify product. Reorder them in Shopify Admin to change the gallery order.